จำนวนถูกใจ = 229,355
ยอดวิว = 13,698,112
หลายครั้งที่งานช่างดูเหมือนจะราบรื่น แต่กลับมีรายละเอียดเล็กๆ น้อยๆ ที่ทำให้ทุกอย่างผิดแผนไปหมด ไม่ว่าจะเป็นการเชื่อมที่ไม่ได้องศา การขันน็อตที่แน่นเกินไป หรือแม้แต่การเลือกใช้เครื่องมือที่ไม่เหมาะสมกับงาน การเรียนรู้จากความผิดพลาดเหล่านี้แหละคือหัวใจสำคัญของช่างทุกคน
สำหรับคนที่หลงใหลในรถคลาสสิก ความท้าทายยิ่งทวีคูณ เพราะอะไหล่บางชิ้นหายากยิ่งกว่างมเข็มในมหาสมุทร แถมเทคนิคการซ่อมบำรุงก็แตกต่างจากรถสมัยใหม่ลิบลับ แต่ด้วยความรักและความอดทน เราก็พร้อมจะเรียนรู้และแก้ไขไปเรื่อยๆ จนกว่ารถคันเก่งจะกลับมาโลดแล่นบนท้องถนนได้อีกครั้ง
แน่นอนว่าระหว่างทางก็ต้องมีเรื่องขำขันเกิดขึ้นบ้าง ไม่ว่าจะเป็นการทำเครื่องมือหลุดมือ การเชื่อมผิดจุด หรือแม้แต่การสตาร์ทรถไม่ติดหลังจากที่ใช้เวลาซ่อมไปทั้งวัน เรื่องเหล่านี้แหละที่ทำให้ชีวิตช่างมีสีสัน และเป็นเรื่องเล่าขำๆ ที่เราเอาไว้คุยกันในวงเพื่อนฝูง
ถ้าคุณเป็นคนหนึ่งที่รักในงานช่าง ชอบรถคลาสสิก และมีอารมณ์ขัน ลองแบ่งปันประสบการณ์ของคุณให้พวกเราฟังบ้างนะครับ บางทีเรื่องราวของคุณอาจจะเป็นประโยชน์ต่อช่างคนอื่นๆ หรืออย่างน้อยก็ทำให้พวกเราหัวเราะได้บ้างก็ยังดี
Rosebud torch head and beeswax works wonders
He kept going righty tighty when he should've just been going lefty loosey
Work the bolt back and forth with a wrench and use a crayon or acetone/atf instead of hitting it with a little impact driver and a chrome socket.
Desh ki halat din pe din begad rahi hai to ruk nay ka kya he matlab jo nikal sakta hai wo nikal jaye
Don't use an impact.
Узнайте один раз что такое термический кожффициент расширения
Что за х, как нагрев вообще может поспособствовать выкручиванию болта?
Impact would kill a weld, they snap wheel studs easy asf
can't be tight if it's a liquid
Most time I usually hammer them two or three times, weld the bolt, let it cool and start manually unscrew, going back and forth while periodically using WD40.
It might take some time but in most cases, I always manage to get them off. And if you can't well time to pierce them as a last resort.
Faut que tu sacre après, c est plus facile😂
You have to cool IT, not untight right after welding.
drilling a hole into bolt and use extractor
Te meri gaadi per testing rha hai or hota hai ki kal car miagye 😂😂
Can't be tight if its a liquid
you shouldn't heat the pin together with the body. Although.. If you like sex with a piece of iron and not a woman….Then you can heat it together
Anybody else say "dammit" aloud when the bolt fell into the engine bay?
ФАТАЛАТИ!
Extruder?🥀
EU PASSO MAU QUANDO ACONTECE ISSO COMIGO 😂😂
Stop using the impact and grab a wrench
Now part 2,3,4..
Esse tipo de serviço da vontade de taça o carro no fogo e paga o cliente
Saw the torch and thought "it can't be stuck if its a liquid" 😂
❤❤ i use this trick
weld a longer stronger rod to it and make a proper weld. That weld will hold longer than the screw and rod combined.
Flawless Victory 😂😂😂
Broken Bolt Wins 😂
Brutality 😂
それは第5ラウンドで決着がつきました😂
Welds not sticking?
Spray it with dust off while you shake the can, the metal freezing makes it shrink and helps break up rust👍
The volt said, bring it, and you said bad choice of words